Built the TS-2 switchboard PCB, tested the 48V phantom power section and it works A.O.K!
LEDs will be mounted under the board.
I can already see a few minor changes to the board design... need to push the switches a bit more forward, maybe by 0.1"
The
height clearance is perfect... about 1mm for the caps and about 2mm for
the switches between these parts and the celing height of the case.
Real tight...
Again, here's the initial design that existed only on the computer.
And here it is, in real life
(with a few minor changes as you can see.)
Now, off to build the main motherboard.
