DIY-Central.com - Go Create something! - PCB Design, Electronics

Did the noise floor at max gain drop at all?

By -1dB! But it's probably awash. It could have been better.

Using the external gain switch with about almost 6" of wires (3" going to, 3" coming back) made RF noise worse. See that clump of white wires there going to the switch?

But "grounding" the case made the unit quieter. In fact, it's a different kind of quiet hissing sound. And again, you only hear this hiss sound at max volume and at +66 and +72dB gain. Anything below that gain and it's super quiet/silent.

Maybe that's why a certain commercial preamp's max gain level setting is only 59dB! I won't mention names. :)

My recommendation: On the final kit, don't save a few bucks to buy a $6 plastic rotary switch instead of the $16 Bourns PCB-mounted, metal selector switch originally spec'd. The wiring job is tedious.

See that big clump of white wires in the photo? Touch it and you'd pick up all sorts of AM radio. (+72dB gain = 4000x amplification!)

But I do know some people are interested in using hookup wires instead of the onboard selector switch so I had to try it. It could work, it will just take more time assembling it, and there could be more potential noise/RF problems. Neat wiring and soldering job is a must if going this route.

Right now, I measured noise floor at -63dB and -64dB @ +72dB gain.
And -70 to -69dB at +66dB gain.
-76 to -75dB at +60dB gain.

photos at +72dB gain.